Hangar Range   >   Flexible Partition Wall

The Flexible Partition Wall will divide factory, warehouse and workshop environments with a clean, clear span of tensioned PVC coated fabric.

Providing a low impact solution, the Flexible Partition Wall divides a space in a single span, fixing to the existing building’s structure. The partition is installed with a single fix, in a short space of time with little to no impact or interference with the existing building.

The Flexible Partition Wall system uses beam-clamps to grip the internal structure of the building. To these beam-clamps, we fix our custom aluminium track from where we suspend the wall. Full length, tailored PVC wall panels are guided into the aluminium track; pre-welded, our sheets will span vast spaces without the need of subdivision. Once positioned and hanging flat, the sheet wall is trapped at its base and edges with an aluminium grip rail. The sheet is finally adjusted and tensioned, creating a smooth and continuous surface, giving the visual distinction of a solid wall.

Product Summary

Wall Panels
600gsm PVC
Primary Steel Fixings
Steel Beam Clamps
Ground Fixing Type
Aluminium cassette

Optional Features

  • High speed roller shutter doors

    Providing energy saving, climate control and efficiencies in site operations – high-speed roller shutter doors can be inserted into the partition. Mounted to steel framework supplied as part of the partitions structure.

  • Personnel Doors

    Personnel doors can be inserted into the partition at any point – enclosed within a single PVC wall panel. We recommend steel personnel doors for stability and security, these can be specified with a number of closure and locking systems depending on site requirements.

  • Transparent Window Panels

    Transparent PVC window panels can be welded into the PVC panels, allowing light to pass into a partitioned area and providing visibility through the partition benefitting health & safety.

  • Thermal Insulation

    Our standard 600gsm PVC coated fabric has a U value of 5.71 w/mk. For sites with operations needing to achieve a greater level of insulation we provide a composite, 3 layer insulated flexible partition, this composite structure achieves a U value of 0.36 w/mk. Our composite insulated partitions are typically employed in the food and drinks industry where maintaining a constant low temperature is key.

  • Increased Dust Prevention

    For sites where a partition is installed to divide two dedicated environments. We can specify floor sealing strips to stop dust passing through the 10mm gap beneath partition walls. We fit a compliant seal to the base of the partition walls, stopping the transfer of dust across the open floor.

Full Space Partition Installation

Product Specification

The Flexible Partition Wall enables dynamic site management; separating manufacturing processes, screening sensitive activity and providing ‘clean’ working environments within active industrial sites. Beyond our standard partitioning, we can also provide higher specification systems to give greater environment control, including thermal barriers, noise reduction and prevention of high levels of dust and particulate ingress.

This partition system can be installed as a single continuous sheet or subdivided into panels to meet specific building requirements; changing direction, fitting around existing structures and services.

Partition panels are formed of a tensioned 600gsm PVC coated fabric. Panel joins are high-frequency welded giving superior strength and longevity; producing a smooth, uninterrupted surface that is easily maintained. Welded sheets are tailored to fit the buildings internal profile, manufactured with a Keder bead running the full length of the sheets top edge for fitting into the top aluminium track.

The hanging system is formed of a continuous aluminium extrusion running along the top edge of the partition; clamped to the buildings primary steels and/ or purlins. This extrusion gives

structure to the partition, allowing the flexible wall to be suspended without any loss in tension. Once in place, the partition is fixed across its base and edges and adjusted using the integrated tensioning system.

If additional steels are required to provide structure or enable the integration of supporting framework, a scheme can be developed to best suit the practicalities of an individual site. If limited roof steels are available or the building being partitioned is of a more unique construction, our experienced in-house engineering team can work to develop bespoke fixing systems to overcome the most challenging of sites.

All components are manufactured from our two sites in the south of England. With two dedicated factories for the production of metal, aluminium and PVC we are uniquely equipped to deal with our customers’ exacting needs.

Shipped to site as a kit of parts. The Flexible Partition Wall delivers our customers a distinct advantage over more traditional alternatives, delivering low site impact, single trade installation, constructed rapidly, with no aftercare requirement.

Find out more about our partitions - Download the full brochure
WordPress Image Lightbox Plugin